Forums DAD | Digital Audio Denmark Core 256 Immersive Monitoring issue


Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #2258
    Tim PeetersTim Peeters

      Hi all!

      Since a couple of days I’m the proud owner of the Core 256 driving my 9.1.4 Atmos system. However sometimes when starting up the unit and the DADman application, it only passes on bassmanaged 2.0 audio, despite of feeding it with a 9.1.4 signal.

      Currently the only solution is going downstairs to the server room, turning it off and on again, and then it works, but it’s quite inconvenient.

      I also noticed there is still a bit of instability with the driver, as it sometimes disconnects without any reason during a session. However I think the still installed RME HDSPe FX driver might be a possible cause. It reconnects once I force stop that application in the background.


      Thank you for the help in advance.


      Kind regards,

      Tim Peeters

      Tim PeetersTim Peeters

        Add: A remote reboot feature would be much appreciated

        NTP/DAD SupportNTP/DAD Support

          Please send an e-mail to support (at) with the monitor profile you use so we can check it. Please also state which operating system you use as well as the driver version.

          Remote boot is available from Device List in DADman. Select the unit, right click and then select Restart.

        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.